olive oil baseball glove

Mink, Neatsfoot or Olive Oil on Baseball Gloves --- Here's Why Not.

Mink oil comes from the skin of a mink.   Neatsfoot come from the hoof of a cow and other animals. Olive oil from, well olives. Animal or vegetable oils are never good for leather because of the potential of rancidity.  The oil can turn rancid.

To understand why, here's a short chemistry lesson.   There are two ends of the animal or vegetable oil spectrum: There is Saturated oils on one end and Unsaturated oils on the other.   Saturated oils are really stable, whereas unsaturated oils can be unstable.

There is a scientific method for testing this.  It’s called the Iodine Value (sometimes referred to as Iodine Index).  The higher the iodine value of an oil, the less stable it is, which means more sensitive to oxidation.   Simply put, the more likely to go rancid.  

The Iodine Value of mink oil is between 80 and 95.  Neatsfoot oil runs between 69 - 75. Olive oil is way up there as well at around 85. These are pretty far up that scale. Mitt-Spit glove oil is about 1. The same low rancidity potential exists for Mitt-Spit Break-in. That means virtually no chance of rancidity with Mitt-Spit products.

Mink, olive and neatsfoot oils all have fairly high Iodine Values.  There are 3 other factors necessary.  Exposure to air (oxygen), heat and light. This is why olive oil bottles are generally green (not clear glass), are stored with the cap on tight and supposed to be stored in a dark cool place.

Your baseball glove however is outside in the sun, exposed to air and gets plenty warm.  So your mitt is exposed to all three factors: Air, Heat and Light.  If it's loaded with olive, mink or neatsfoot oil, It doesn't take long for the oil in the glove to go rancid. What does this mean to you?  Anything going rancid in the leather will help deteriorate that leather.  It will make your glove smell and is generally unhealthy. Yuk!

Mitt-Spit products on the other hand is made from an oil that is often found in cosmetics, or even as a food additive.  It's very safe for your mitt too.  As mentioned, Mitt-Spit glove oil and Mitt-Spit Break-in have an iodine value of about 1.  For the sake of your glove,use Mitt-Spit products. If you invest in the correct care products, you’ll never be sorry. Go here to buy Mitt-Spit Products.

 

Does glove oil plug up the pores of baseball glove leather?

There is a lot written on the internet about baseball glove care.  Much of it is wrong, for example, the clogging of leather pores with conditioning agents.  The general theme is that the "conditioner" blocks the ability of the leather to breath.  So let's take a look at the science of it.  

To answer the question directly --- the right glove oil chemistry does not clog leather pores.  However, a heavy, viscous chemistry can.  For example, Vaseline slathered across a piece of leather will NOT soak in, but just sit on the surface.  All it does is add weight to the glove and block the leather (skin) from breathing.  So,  you end up with a greasy, gloppy mess that does in fact block pores.

A good starting point is to ask: Why does leather need regular glove oil anyway?

Here's some background:  Leather has natural moisturizing agents that have been infused into the leather at the tannery.  This is what makes the leather pliable, not stiff as wood.  A average of 25% of the leather's mass is moisture.  Because leather is porous, it breathes.  So, it loses moisture through evaporation.  As leather loses moisture, it stiffens and actually can shrink (loses mass).  Therefore, it's important for the long term life of glove leather, to keep the leather moisture content at the proper level.  This is accomplished by using a properly chemically engineered glove oil.

What then is the right chemistry for a leather glove?  

A baseball glove oil should have the following attributes:

1.  A softening agent that the leather will absorb is essential.  If it doesn't soak in then it's useless. The glove oil should be absorbed deeply, migrate into the internal leather fibers, not just the surface.

2. Baseball glove oil should be engineered specifically for baseball glove leather, not cross marketed from other intended uses.  There are many different types of leather.  How the leather is tanned (processed) at a tannery determines its characteristics.  The products developed for treating that leather, once in the hands of a consumer, should take that into consideration.

3. It should be made with quality ingredients that will have long lasting, positive effects on leather.

4. Glove oil should be pH balanced to the leather.  If it isn't, then it can actually be harmful, (i.e. saddle soap) break down the leather, shortening the life of the leather.  More on this point in another post.

5. It should be easy to apply and creamy in texture so you can see it as you apply it.  

6. It should NOT leave a sticky or oily residue on the leather.

7. A thin coating of glove oil should dissipate into the leather rapidly.

8. It should leave a smooth, leather-like feel to the glove after it has been applied.

9. It should have a pleasant, new leather aroma. 

These are the attributes Advanced Leather Solutions engineered into Mitt-Spit Glove oil.  With 35 years experience working with leather as a leather restoration company, Advanced Leather Solutions know what's good for leather and what can be harmful.  We understand the chemical engineering behind quality leather care products and have applied this knowledge to Mitt-Spit Solutions, a whole class of products that you can count on for the long term vitality of your baseball glove. Go to Mitt-Spit Products to buy the correct products for your glove.